Bone marrow mesenchymal stem cells offer an immune-privileged niche to Cutibacterium acnes in case of implant-associated osteomyelitis.

Considered as some of the most devastating complications, Cutibacterium acnes (C. acnes)-related osteomyelitis are among the hardest infections to diagnose and treat. Mesenchymal stem cells (MSCs) secrete number of immunomodulatory and antimicrobial soluble factors, making them an attractive treatment for bacterial infection. In this study, we examined MSCs/C. acnes interaction and analyzed the subsequent MSCs and bacteria's behaviors. Human bone marrow-derived MSCs were infected by C. acnes clinical strain harvested from non-infected bone site. Following 3 h of interaction, around 4% of bacteria were found in the intracellular compartment. Infected MSCs increased the secretion of prostaglandin E2 and indolamine 2,3 dioxygenase immunomodulatory mediators. Viable intracellular bacteria analyzed by infrared spectroscopy and atomic force microscopy revealed deep modifications in the wall features. In comparison with unchallenged bacteria, the viable intracellular bacteria showed (i) an increase in biofilm formation on orthopaedical-based materials, (ii) an increase in the invasiveness of osteoblasts and (iii) persistence in macrophage, suggesting the acquisition of virulence factors. Overall, these results showed a direct impact of C. acnes on bone marrow-derived MSCs, suggesting that blocking the C. acnes/MSCs interactions may represent an important new approach to manage chronic osteomyelitis infections. STATEMENT OF SIGNIFICANCE: The interaction of bone commensal C. acnes with bone marrow mesenchymal stem cells induces modifications in C. acnes wall characteristics. These bacteria increased (i) the biofilm formation on orthopaedical-based materials, (ii) the invasiveness of bone forming cells and (iii) the resistance to macrophage clearance through the modification of the wall nano-features and/or the increase in catalase production.

Role of active nanoliposomes in the surface and bulk mechanical properties of hybrid hydrogels.

Nanoliposomes are widely used as delivery vehicles for active compounds. Nanoliposomes from rapeseed phospholipids were incorporated into interpenetrating polymer network hydrogels of gelatin methacryloyl and alginate. The multiscale physicochemical properties of the hydrogels are studied both on the surface and through the thickness of the 3D network. The obtained composite hydrogels exhibited strong mechanical properties and a highly porous surface. The blend ratio, as well as the concentration of nanoliposomes, affects the properties of the hydrogels. Nanofunctionalized hydrogels induced keratinocyte â€‹growth. These advantageous characteristics may open up many applications of the developed hydrogels in drug delivery and tissue engineering.

Bioinspired Nanofeatured Substrates: Suitable Environment for Bone Regeneration.

Bone mimicking coatings provide a complex microenvironment in which material, through its inherent properties (such as nanostructure and composition), affects the commitment of stem cells into bone lineage and the production of bone tissue regulating factors required for bone healing and regeneration. Herein, a bioactive mineral/biopolymer composite made of calcium phosphate/chitosan and hyaluronic acid (CaP-CHI-HA) was elaborated using a versatile simultaneous spray coating of interacting species. The resulting CaP-CHI-HA coating was mainly constituted of bioactive, carbonated and crystalline hydroxyapatite with 277 ± 98 nm of roughness, 1 µm of thickness, and 2.3 ± 1 GPa of stiffness. After five days of culture, CaP-CHI-HA suggested a synergistic effect of intrinsic biophysical features and biopolymers on stem cell mechanobiology and nuclear organization, leading to the expression of an early osteoblast-like phenotype and the production of bone tissue regulating factors such as osteoprotegerin and vascular endothelial growth factor. More interestingly, amalgamation with biopolymers conferred to the mineral a bacterial antiadhesive property. These significant data shed light on the potential regenerative application of CaP-CHI-HA bioinspired coating in providing a suitable environment for stem cell bone regeneration and an ideal strategy to prevent implant-associated infections.

Harnessing Wharton's jelly stem cell differentiation into bone-like nodule on calcium phosphate substrate without osteoinductive factors.

An important aim of bone regenerative medicine is to design biomaterials with controlled chemical and topographical features to guide stem cell fate towards osteoblasts without addition of specific osteogenic factors. Herein, we find that sprayed bioactive and biocompatible calcium phosphate substrates (CaP) with controlled topography induce, in a well-orchestrated manner, Wharton's jelly stem cells (WJ-SCs) differentiation into osteoblastic lineage without any osteogenic supplements. The resulting WJ-SCs commitment exhibits features of native bone, through the formation of three-dimensional bone-like nodule with osteocyte-like cells embedded into a mineralized type I collagen. To our knowledge, these results present the first observation of a whole differentiation process from stem cell to osteocytes-like on a synthetic material. This suggests a great potential of sprayed CaP and WJ-SCs in bone tissue engineering. These unique features may facilitate the transition from bench to bedside and the development of successful engineered bone. STATEMENT OF SIGNIFICANCE: Designing materials to direct stem cell fate has a relevant impact on stem cell biology and provides insights facilitating their clinical application in regenerative medicine. Inspired by natural bone compositions, a friendly automated spray-assisted system was used to build calcium phosphate substrate (CaP). Sprayed biomimetic solutions using mild conditions led to the formation of CaP with controlled physical properties, good bioactivity and biocompatibility. Herein, we show that via optimization of physical properties, CaP substrate induce osteogenic differentiation of Wharton's jelly stem cells (WJ-SCs) without adding osteogenic supplement factors. These results suggest a great potential of sprayed CaP and WJ-SCs in bone tissue engineering and may facilitate the transition from bench to beside and the development of clinically successful engineered bone.

Lactic acid bacteria in dairy food: surface characterization and interactions with food matrix components.

This review gives an overview of the importance of interactions occurring in dairy matrices between Lactic Acid Bacteria and milk components. Dairy products are important sources of biological active compounds of particular relevance to human health. These compounds include immunoglobulins, whey proteins and peptides, polar lipids, and lactic acid bacteria including probiotics. A better understanding of interactions between bioactive components and their delivery matrix may successfully improve their transport to their target site of action. Pioneering research on probiotic lactic acid bacteria has mainly focused on their host effects. However, very little is known about their interaction with dairy ingredients. Such knowledge could contribute to designing new and more efficient dairy food, and to better understand relationships between milk constituents. The purpose of this review is first to provide an overview of the current knowledge about the biomolecules produced on bacterial surface and the composition of the dairy matter. In order to understand how bacteria interact with dairy molecules, adhesion mechanisms are subsequently reviewed with a special focus on the environmental conditions affecting bacterial adhesion. Methods dedicated to investigate the bacterial surface and to decipher interactions between bacteria and abiotic dairy components are also detailed. Finally, relevant industrial implications of these interactions are presented and discussed.

Drinking water biofilm cohesiveness changes under chlorination or hydrodynamic stress.

Attempts at removal of drinking water biofilms rely on various preventive and curative strategies such as nutrient reduction in drinking water, disinfection or water flushing, which have demonstrated limited efficiency. The main reason for these failures is the cohesiveness of the biofilm driven by the physico-chemical properties of its exopolymeric matrix (EPS). Effective cleaning procedures should break up the matrix and/or change the elastic properties of bacterial biofilms. The aim of this study was to evaluate the change in the cohesive strength of two-month-old drinking water biofilms under increasing hydrodynamic shear stress τw (from ∼0.2 to ∼10 Pa) and shock chlorination (applied concentration at T0: 10 mg Cl2/L; 60 min contact time). Biofilm erosion (cell loss per unit surface area) and cohesiveness (changes in the detachment shear stress and cluster volumes measured by atomic force microscopy (AFM)) were studied. When rapidly increasing the hydrodynamic constraint, biofilm removal was found to be dependent on a dual process of erosion and coalescence of the biofilm clusters. Indeed, 56% of the biofilm cells were removed with, concomitantly, a decrease in the number of the 50-300 µm(3) clusters and an increase in the number of the smaller (i.e., <50 µm(3)) and larger (i.e., >600 µm(3)) ones. Moreover, AFM evidenced the strengthening of the biofilm structure along with the doubling of the number of contact points, NC, per cluster volume unit following the hydrodynamic disturbance. This suggests that the compactness of the biofilm exopolymers increases with hydrodynamic stress. Shock chlorination removed cells (-75%) from the biofilm while reducing the volume of biofilm clusters. Oxidation stress resulted in a decrease in the cohesive strength profile of the remaining drinking water biofilms linked to a reduction in the number of contact points within the biofilm network structure in particular for the largest biofilm cluster volumes (>200 µm(3)). Changes in the cohesive strength of drinking water biofilms subsequent to cleaning/disinfection operations call into question the effectiveness of cleaning-in-place procedures. The combined alternating use of oxidation and shear stress sequences needs to be investigated as it could be an important adjunct to improving biofilm removal/reduction procedures.

Double entrapment of growth factors by nanoparticles loaded into polyelectrolyte multilayer films.

Delivery of growth factors and control of vascularization are prominent problems in regenerative medicine. Vascular endothelial growth factor (VEGF) has been used both in vitro and in vivo to promote angiogenesis but due to its short half-life its controlled delivery is a sought after method. In this study we present a new concept of degradable drug loaded nanoparticles entrapped into exponentially growing multilayer films. Through hydrolysis of the nanoparticles, the drug can be delivered over long periods in a controlled manner. Poly(ε-caprolactone) nanoparticles were loaded with VEGF and in turn the release of VEGF from a surface is controlled by a thick layer-by-layer polyelectrolyte film. Direct loading of VEGF inside the film was not efficient for long-term applications. When VEGF loaded nanoparticles were introduced into the film, the particles were equally distributed inside and were stable after several washes. Moreover, the presence of the film sustained the release of VEGF for 7 days. Addition of the nanoparticles to the film promoted endothelial cell proliferation, mainly due to the presence of VEGF. Mechanical properties of the film (Young's moduli) were also improved by the presence of nanoparticles. However, in the presence of the film loaded with nanoparticles and without any direct contact with this film, endothelial cell growth was also enhanced on polystyrene and on Transwell insert surfaces which demonstrates the effectiveness of the nanoparticles not only to improve the mechanical properties of the film but also to deliver active VEGF. An increase in nitric oxide levels as an indicator of endothelial cell activity was monitored and was correlated with the release of VEGF from the nanoparticle/film platform. Finally, such a system can be used as an auxiliary delivery body within implants to finely control the release of bioactive agent containing nanoparticles.

Dynamic modulation of fimbrial extension and FimH-mannose binding force on live bacteria under pH changes: a molecular atomic force microscopy analysis.

Mechanical and conformational properties of type 1 fimbriae were evaluated on live bacterial cells by Single Molecule Force Spectroscopy (SMFS) and Dynamic Force Spectroscopy (DFS) in buffered solutions whose pH varied from 3 to 9. We evidenced that both fimbrial extension and fimbrial binding force to mannosylated-surface are modulated with changing the externally applied shear force and the solution pH. In particular, intertwined FimA-FimA and FimH-mannose interactions lead to a 5 to 25-fold decrease of the fimbrial unwinding for pulling rates larger than 10 µm/s and for pH values outside the range 5 to 7. In this pH range, the FimH-mannose binding force is maximal with a magnitude of -150-200 pN and the fimbriae extension reaches 8 µm. The enhancement of the FimH-mannose binding force at neutral pH, as evidenced from molecular AFM analyses, strongly correlates with an optimum in yeast agglutination detected at pH 5 to 7. The results reported in this work suggest that "catch bond effect" was negligible over the range of pulling rates tested, and both FimA-FimA and FimH-mannose interactions under given pH and external shear force conditions modify the ability of the bacteria to efficiently colonize host surfaces.

In vitro interactions between probiotic bacteria and milk proteins probed by atomic force microscopy.

Interactions between microbial cells and milk proteins are important for cell location into dairy matrices. In this study, interactions between two probiotic strains, Lactobacillus rhamnosus GG and Lactobacillus rhamnosus GR-1, and milk proteins (micellar casein, native and denatured whey proteins) were studied. The bacterial surface characterization was realized with X-ray photoelectron spectroscopy (XPS) to evaluate surface composition (in terms of proteins, polysaccharides and lipid-like compounds) and electrophoretic mobility that provide information on surface charge of both bacteria and proteins along the 3-7 pH range. In addition, atomic force microscopy (AFM) enabled the identification of specific interactions between bacteria and whey proteins, in contrast to the observed nonspecific interactions with micellar casein. These specific events appeared to be more important for the GG strain than for the GR-1 strain, showing that matrix interaction is strain-specific. Furthermore, our study highlighted that in addition to the nature of the strains, many other factors influence the bacterial interaction with dairy matrix including the nature of the proteins and the pH of the media.

Surface properties of bacteria sensitive and resistant to the class IIa carnobacteriocin Cbn BM1.

AIMS: Class IIa bacteriocins are small antimicrobial peptides synthesized by lactic acid bacteria. The proposed mechanisms of action for class IIa bacteriocins suggest that the physicochemical properties of the target bacterial surface govern the bacteriocin antimicrobial activity. The aim of this study is to decipher the relationship between both sensitivity and resistance to a class IIa bacteriocin, carnobacteriocin BM1 and physicochemical surface properties of bacteria. METHODS AND RESULTS: The study was performed on 18 strains by a microbial adhesion to solvents process and with electrophoretic mobility measurements considering bacteria as soft particles. A large variation in bacterial surface properties is observed among the bacterial populations. Electro-hydrodynamic parameters values appear to be more homogeneous for sensitive strains than for the resistant ones, which can exhibit more extreme values. CONCLUSIONS: Physicochemical surface properties of 18 strains determined show large variations between the strains. However, no direct link between these surface properties and the resistant/sensitive phenotypes of the strains can be stated. SIGNIFICANCE AND IMPACT OF THE STUDY: The surface physicochemical properties tested have a low predictive power to discriminate sensitive or resistant strains when determined at the bacterial population scale.

Effect of cholesterol and fatty acids on the molecular interactions of fengycin with Stratum corneum mimicking lipid monolayers.

The combination of atomic force microscopy (AFM) and the Langmuir trough technique was used in this work to investigate the molecular interactions of fengycin with lipid monolayers constituted of the major lipid classes found in human stratum corneum (SC). AFM imaging o f spread SC lipids/fengycin monolayers showed that fengycin preferentially partitions into cholesterol-rich phases surrounding 2D domains mainly constituted of ceramide and fatty acid molecules. Penetration experiments of fengycin from the subphase into SC-mimicking monolayers clearly indicated that the lipopeptide insertion at the lipid interface is enhanced in the presence of cholesterol. AFM analysis of mixed SC lipids/fengycin monolayers obtained after lipopeptide penetration revealed that cholesterol strongly interacts with fengycin and undergoes specific molecular interactions with more disordered, loosely packed ceramide molecules. These results highlight the capacity of fengycin to interact with the lipid constituents of the extracellular matrix of SC and, in particular, with cholesterol.

Shear mechanical anisotropy of side chain liquid-crystal elastomers: influence of sample preparation.

We study the mechanical anisotropy of a series of uniaxial side chain nematic elastomers prepared with the same chemical composition but with different preparation protocols. For all the compounds, the experiments performed as a function of temperature show no discontinuity in both G' (//) and G' ( perpendicular) (the labels // and perpendicular stand for the director parallel, respectively perpendicular to the shear displacement) around the nematic-isotropic (N-I) phase transition temperature determined by DSC. They also all show a small decrease in G' (//) starting at temperatures well above this temperature (from approximately 4( degrees ) C to approximately 20( degrees ) C depending on the compound studied) and leading to a small hydrodynamic value of the G' ( perpendicular)/G' (//) ratio. The measurements taken as a function of frequency show that the second plateau in G' (//) and the associated dip in G (//)" expected from dynamic semi-soft elasticity are not observed. These results can be described by the de Gennes model, which predicts small elastic anisotropy in the hydrodynamic and linear regimes. They correspond to the behavior expected for compounds beyond the mechanical critical point, which is consistent with the NMR and specific heat measurements taken on similar compounds. We also show that a reduction in the cross-linking density does not change the non-soft character of the mechanical response. From the measurements taken as a function of frequency at several temperatures we deduce that the time-temperature superposition method does not apply. From these measurements, we also determine the temperature dependence of the longest relaxation time tau(E) of the network for the situations where the director is either parallel or perpendicular to the shear velocity. Finally, we discuss the influence on the measurements of the mechanical constraint associated with the fact that the samples cannot change their shape around the pseudo phase transition, because of their strong adherence on the sample-bearing glass slides.